A Quick Overlook of Flooring – Your Cheatsheet
Steps to Refinishing Your Hardwood Floor.
When you are investing in your floor, it is important to use hardwood flooring materials because of the many benefits, but also there are great responsibilities. This is because with time they can lose their glory and therefore the need to replace or refinish them. What you need to do therefore is define what you need to restore the hardwood floor. When you want to refinish the hardwood floor, you can engage professionals but also it is simple, you can do-it-yourself. Continue reading below to learn more about different steps to refinishing hardwood floors.
When it comes to refinishing the hardwood floor, you will need to have the appropriate materials that will be used in this process.There are many materials you need to purchase which can include an oil-based stain, shop rags, shop vac, sandpaper, stain application pads to name but a few. It is possible you don’t understand much about different refinishing materials to purchase, and that is where you can engage a professional for advice. Having the equipment ready, you can now prepare the floor by removing the carpet tacks, nails and other objects.
After removing the object from the floor, you should know surgery floor using the 60-grit sandpaper and the belt sander. The same procedure should be repeated more than once with different sizes of sandpapers and afterward use the shop vac in removing the dust in the debris.
The step that will follow flow sanding will be water popping. What water popping means is the process of getting the floor wet to help in raising the grain. When water is used for after clearing the dust, it is helping the wood in absorbing the stains. Water popping is possible by dipping the shop rag in water then using it to wipe the floor.
After we are done with the water popping, you need to stain the floor using oil-based stains of which you use the stain applicator pads. There is a procedure to follow when applying the oil-based stains because, after the first application, you should give it 24 to 48 hours to dry. After the first coating has dried up, you should apply polyurethane using the foam roller of which it takes two hours.
Now after you are done with the coating, it is time you start the buffing using the 220-grit screen. After you are done with the buffing, it is time you apply another coating of the polyurethane of which you follow the same process 3 to 4 times. After you’re done with this process, your floor will be a brand-new. If you want to get more info on how to make the hardwood floor last long, there is a lot of info on the Internet.